Choosing a gift is always a very responsible and difficult task, especially when it comes to a dear and close person - your best friend. And even despite the fact that you have already eaten a ton of salt with him, have seen him in different life situations and know his character and tastes as well as your own, the desire to see joy in the eyes and sincere delight is natural and understandable to everyone. Expensive gifts will certainly make an impression. But nothing is more valuable than an unexpected surprise that you made with your own hands.
What to give to your best friend?
The gift you make should constantly remind you of you and be practical for its owner. It is perhaps difficult to imagine a better gift than a floss bauble. For beginning needlewomen there are many easy patterns and explanations, ranging from tips on weaving the simplest bracelets to detailed stories on how to weave a floss bauble with a name. And creating such a surprise will bring a sea of positive emotions.
A bauble is a bracelet made from many knots that are tied in one of the special ways. They first appeared in Indian tribes, and even then they were given to those whom they considered their friends. After this, the idea of “friendship bracelets” appeared in a well-known subculture - hippies. Nowadays, baubles are extremely popular among teenagers; they are woven from different materials and in different ways, but their main purpose remains the same as before. If you give someone such a bracelet, then it is a sign that this person is your best friend!
What are baubles made of?
Many years have passed since the birth of baubles, new weaving ideas appeared, and new materials were used. At the moment, the following materials are used in fennel weaving:
- beads;
— waxed and leather laces;
- floss;
— threads for knitting;
- thin satin ribbons.
Despite the variety of materials, many craftsmen focus their attention on the option where they weave baubles from floss. These threads are bright, thanks to them even floss baubles for beginners come out smooth and neat.
In addition to a wide range of materials, there are also two main weaving methods:
-direct;
- oblique.
Most believe that floss baubles for beginners should be woven in an oblique way, since it is much easier than straight and does not require excessive care and effort. However, most patterns for weaving baubles are created specifically for direct weaving, and they look more original and interesting. In any case, everyone makes their own choice. But one question remains unchanged.
"Cross" technique
This technique is perfect for beginners.
Weaving materials:
First, measure the fishing line to 100 centimeters, thread both ends into a needle. Attach the clasp, then put one bead on each needle, then proceed according to the scheme.
Using an elastic thread for a bracelet, you can do without a clasp.
Wide beaded bracelets are woven using this pattern; you just need to weave several chains and connect them. The finished version is shown in the photo:
Where to start weaving any type of fenki?
The quality of the product always directly depends on the quality of the materials used in weaving. If you are interested in a straight weave floss bauble, then use “Petersburg” or “Iris” threads. They enjoy the greatest recognition and are of excellent quality.
Next, you need to choose the appropriate scheme for your product. Here you can give full rein to your imagination, since patterns for floss baubles can be found on any thematic resource that is dedicated to this type of needlework! Of course, many are looking for advice on how to weave a bauble from floss with a name, some are guided by the interests of their friend, and some simply understand at first glance that this is exactly the kind of bauble they have always wanted to weave.
To determine the size of the threads that will be needed for the bauble, it is necessary to carry out calculations. The circumference of the wrist must be multiplied by 4.3 and added to this number the required length of the ties, multiplied by 2. To be sure, you can leave a few more centimeters so that the bauble is sure to be a success and there are no unpleasant embarrassments in the end.
After the pattern has been chosen and the threads of the desired colors have been selected, you need to secure them carefully and tightly. Here are the main options:
1. Fixation with a pin. The threads of the future fenya are tied into knots, and then pinned to any durable object with a pin. This is a very convenient method, since you can move the work surface to wherever is convenient for you at any time.
2. The threads are gathered together one by one and secured on top with tape.
3. The future workpiece is secured using clamps.
While you are new to this business, you can try fixing the threads in different ways to find the method that is most convenient for you.
After you have completed all these steps, the main division into weaving methods begins - oblique or straight. And now more about each of them.
How to weave a bauble with oblique weaving?
To weave this type of baubles, you can use a random set of threads - in oblique weaving, a specific pattern is not tracked, only the alternation of threads. You can weave by tying knots in only one direction - right or left.
It is a little more difficult to weave a bauble on the left and right sides at once. Identical threads on both sides are tied towards each other and at the end connected with a double knot.
Let's start with the knots
The first knot, which is called the “knot through the hand,” is needed in those cases to tie all the threads at the beginning and end of the weaving. Place all the threads together and hold them between the thumb and forefinger of both hands.
With your right hand, wrap the threads around the index and middle fingers of your left hand, pass the ends that are held in your right hand through the resulting loop and tighten the knot tightly.
The main knot. This very simple knot is the basis of the weave. Leave the red thread hanging freely, wrap the yellow thread around the red one first down, then up, thread it into the resulting loop and tighten tightly. Repeat everything from the beginning and the main knot is ready.
If you tie knots on several threads, the goal will be a series of knots, which make up many patterns.
How to weave a bauble with straight weaving?
During such weaving, you need to carefully follow the pattern and constantly count the knots. Lack of concentration can cause the pattern to go wrong and you will have to do it all over again.
In straight weaving there is a warp thread that is used as a background. Usually it is a little longer than the others. When you weave a bauble with only two colors, then when you encounter a color change, you simply change the direction of the knot (from right to left or vice versa), and then continue normal weaving. If the bauble has three or more colors, then you need to tie the thread in the required place and also weave it into the pattern.
Despite all the difficulties and possible failures, with the help of attention and effort you can create a real masterpiece, and in the future I will come to you with questions about how to weave a floss bauble with a name or with requests to find a pattern with your favorite rock band.
Of course, personalized baubles deserve special attention. They are best suited for weaving a surprise for a person whose interests you have not yet thoroughly studied.
How to prepare a drawing?
A laconic, stylish and original bauble with a name and a diagram for it can be made with your own hands. Even beginners in the art of fennel weaving can do the work, but basic training is necessary. A creative and fashionable accessory will dilute not only a female, but also a strict male image, this is the phenomenon of the versatility of ancient jewelry.
A strict male image will be diluted with beautiful baubles
Before drawing patterns for weaving baubles, you need to decide on the choice of font:
- Simple capital letters.
- Lowercase letters.
- Capital English letters.
- Lowercase letters of the English font.
Choosing letters for weaving baubles with names
A name or phrase made of simple letters is a common way of decoration, but in addition to the standard options, you can use any font or language. The process of weaving a bauble from beads with a name or from floss threads requires perseverance. From the first minute the process will captivate you, drawing you into the world of fantasy and creativity.
Baubles made from floss and beads
For weaving baubles, patterns will help optimize the process. A visual aid, drawn by hand, will help you weave a composition from many combinations and elements in the correct order, and the reward for your work will be a laconic and textured pattern.
Beaded bracelet with embroidery
For the simplest weaving of a bauble with a name, we will prepare a standard pattern. To work, you will need an ordinary sheet of paper with a checkered pattern for ease of drawing elements, as well as a pencil or pen. How to make a drawing diagram?
Johnny Depp is an ardent fan of hand made bracelets
When preparing the baubles pattern, we take into account that one cell is one thread. If you need to highlight large letters, then it makes sense to take into account 2-3 threads in the pattern.
Learning to draw a diagram
- We start painting the cells from the center of the sheet.
- We calculate the free margin on the sheet so that the inscription appears strictly in the center.
- We count the cells horizontally. The formula is simple: there are approximately five rows of cells per centimeter of bracelet. Divide the number of rows by five, and we get the length of the name on the future decoration.
- We measure the circumference of the wrist. From the resulting value, subtract the length of the inscription, and then divide the number in half.
- We plot all the obtained values on our diagram by coloring the cells.
Weaving pattern drawn by hand
In a similar way, you can put not only a name on the drawing, but also any other memorable inscriptions, aphorisms or quotes.
Drawing a weaving pattern with names
If you do not want or have the opportunity to prepare a manual yourself, you can use ready-made ideas or auxiliary programs. Handicrafts and technological progress get along well with each other, making it easier for craftswomen to work and leaving more space for creativity.
Pattern for weaving baubles with names
The most popular today is the specialized program “generator of baubles with names.” What is special about the generator? We enter all the data, name, inscription, font, into a special software field. The generator processes the data and gives you a ready-made diagram for the future bauble. All we have to do is simply print it out and bring our creative idea to life with pleasure.
Tips for weaving personalized baubles
Choosing the threads and colors of your bracelet is a purely personal matter. However, when you ask yourself the question: “How to weave a floss bauble with a name?” — a completely logical thought arises: where can I find the necessary naming schemes? There's really nothing complicated about it. You can either find ready-made diagrams or enter the desired name in the baubles generator.
In any case, weaving should be fun. Let the patterns of floss baubles be clear, the threads do not get tangled, and each bracelet will be a real handmade masterpiece!
